de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator

de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator

$999.00
de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator
de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator
de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator
de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator
de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator
de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator

de Lisle Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator

$999.00
Two attenuators in one 2U rack! The de Lisle Stereo 100W Reactive Attenuator allows you to knock your amp's volume down to a more manageable level while maintaining its natural feel thanks to the reactive load. Attenuation is linearly variable up to -22.5dB. Our unique design eliminates the need for impedance matching at the amp. Just connect the attenuator to your amp's 8 ohm output, then you can use any combination of cabs as long as the total load is between 16 and 4 ohms. Use the transformer isolated D.I. to go straight into your DAW and load up your favorite IRs with the ability to record silently.

Pair the de Lisle Stereo 100W Reactive Attenuator with one of our Stereo Amp-Speaker Selectors and save!
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $999.00
999.000
A one-time price of $999.00 will be added to your order.
Facebook
X
Email
Pinterest
  • Specs
• 100 Watts Maximum per Channel
• Optimized for 8 Ohms
• Linearly Variable Attenuation
• Reactive Load Box
• 80hz Resonant Frequency
• Premium US Made Inductors
• Parallel Speaker Jacks
• Use 16, 8 or 4 Ohm Cabs
• Silent Recording Switch
• 20hz-20Khz Transformer Isolated D.I.
• D.I. Level Control
• Ground Lift Switch
• Anodized Aluminum and Steel Housing
• Signal Indicator LED
• 19"W x 3.5"H x 9"D

Related Products

  • ￩
    ￫
    de Lisle Amp-Speaker Selector 8x8 Stereo Deluxe

    de Lisle Amp-Speaker Selector 8x8 Stereo Deluxe

    $949.00
    The de Lisle Amp-Speaker 8x8 Stereo Deluxe was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop and D.I.

    The 8x8 Stereo Deluxe is our first model to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

    Amplifier Banks A/B each have up to 4 amps available for a total of 8. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

    Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

    The 8x8 Stereo Deluxe runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

    Select below to bundle with our Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator and save $200.00!

    Protected by US Patent
    Select Options

    de Lisle Amp-Speaker Selector 8x8 Stereo Deluxe

    $949.00
    The de Lisle Amp-Speaker 8x8 Stereo Deluxe was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop and D.I.

    The 8x8 Stereo Deluxe is our first model to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

    Amplifier Banks A/B each have up to 4 amps available for a total of 8. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

    Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

    The 8x8 Stereo Deluxe runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

    Select below to bundle with our Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator and save $200.00!

    Protected by US Patent
    Select Options

    de Lisle Amp-Speaker Selector 8x8 Stereo Deluxe

    $949.00
    Select Options
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • ￩
    ￫
    de Lisle Amp-Speaker Selector 8x8 Stereo Pro

    de Lisle Amp-Speaker Selector 8x8 Stereo Pro

    $1,449.00
    The de Lisle Amp-Speaker 8x8 Stereo Pro was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop, fx loop and D.I.

    The 8x8 Stereo Pro is our first model to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

    Amplifier Banks A/B each have up to 4 amps available for a total of 8. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

    Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

    The 8x8 Stereo Pro runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

    Select below to bundle with our Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator and save $200.00!

    Protected by US Patent
    Select Options

    de Lisle Amp-Speaker Selector 8x8 Stereo Pro

    $1,449.00
    The de Lisle Amp-Speaker 8x8 Stereo Pro was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop, fx loop and D.I.

    The 8x8 Stereo Pro is our first model to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

    Amplifier Banks A/B each have up to 4 amps available for a total of 8. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

    Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

    The 8x8 Stereo Pro runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

    Select below to bundle with our Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator and save $200.00!

    Protected by US Patent
    Select Options

    de Lisle Amp-Speaker Selector 8x8 Stereo Pro

    $1,449.00
    Select Options
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • ￩
    ￫
    de Lisle Amp-Speaker Selector 16x8 Stereo

    de Lisle Amp-Speaker Selector 16x8 Stereo

    $1,499.00
    The de Lisle Amp-Speaker 16x8 Stereo was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop and D.I.

    The 16x8 Stereo is one of our newest models to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

    Amplifier Banks A/B each have up to 8 amps available for a total of 16. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

    Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

    The 16x8 Stereo runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

    Select below to bundle with our Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator and save $200.00!

    Protected by US Patent
    Select Options

    de Lisle Amp-Speaker Selector 16x8 Stereo

    $1,499.00
    The de Lisle Amp-Speaker 16x8 Stereo was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop and D.I.

    The 16x8 Stereo is one of our newest models to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

    Amplifier Banks A/B each have up to 8 amps available for a total of 16. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

    Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

    The 16x8 Stereo runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

    Select below to bundle with our Stereo 100W Impedance Matching Linearly Variable Reactive Attenuator and save $200.00!

    Protected by US Patent
    Select Options

    de Lisle Amp-Speaker Selector 16x8 Stereo

    $1,499.00
    Select Options
    Successfully Added to your Shopping Cart
    Adding to Cart...