de Lisle Amp-Speaker Selector 8x8
$499.00
A one-time price of $499.00 will be added to your order.
- Specs
• Hand-Wired
• Completely Passive
• Amplifier Input (8)
• Speaker Output (8)
• Protection Loads for Unused Amplifiers
• Rack Mount Chassis
• Powder Coat Finish
• 150W Maximum Power
• Lifetime Warranty
• Completely Passive
• Amplifier Input (8)
• Speaker Output (8)
• Protection Loads for Unused Amplifiers
• Rack Mount Chassis
• Powder Coat Finish
• 150W Maximum Power
• Lifetime Warranty
Related Products
-
￩￫
de Lisle Amp-Speaker Selector 4x4 with Stereo Attenuator Loop Return
$499.00The de Lisle Amp-Speaker Selector 4x4 with Stereo Attenuator Loop Return was designed as a studio tool to conveniently route the output of up to four tube amplifiers to various speaker cabinets. This model features an attenuator loop to allow a single attenuator to be shared between any combination of the amps and speakers. It was developed specifically with the Two Notes Reload II, Boss Tube Amp Expander and similar products. The 4x4 with Stereo Attenuator Loop Return allows you to assign speakers to both outputs of the attenuator to easily create a flexible wet-dry-wet setup. Use up to 4 amps simultaneously.
Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the four Speaker switches on the front panel correspond to the four speaker connections. The 1-4 positions of each bank match that speaker cabinet to the selected amplifier.
Connect your attenuator's input to the Send jack and its speaker output(s) to the Return A and/or B jacks. Use the front panel Send knob to connect the attenuator to any of the available amps. Then, set one or more of the Speaker knobs to the Return A/B position.
Use multiple amps at the same time, swap speaker cabinets between amps, share a single attenuator or connect multiple speakers to an amp in parallel. As a precaution, the unused amps see a load.
Bundle with our Amplifier Input Selector 6x to save $100!Maximum quantity exceededMinimum purchase amount of 0 is requiredde Lisle Amp-Speaker Selector 4x4 with Stereo Attenuator Loop Return
$499.00Successfully Added to your Shopping CartAdding to Cart... -
￩￫
de Lisle Amp-Speaker Selector 6x6
$499.00The de Lisle Amp-Speaker Selector 6x6 was designed as a studio tool to conveniently route the output of up to six tube amplifiers to various speaker cabinets.
Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the eight Speaker switches on the front panel correspond to the eight speaker connections. The 1-6 positions of each bank match that speaker cabinet to an amplifier.
Use multiple amps at the same time, swap speaker cabinets between amps, or connect multiple speakers to an amp in parallel. And as a precaution, the unused amps see a load.
Bundle with our Amplifier Input Selector 6x to save $100!
This device is compatible with solid state, modeling or tube amplifiers.Maximum quantity exceededMinimum purchase amount of 0 is requiredde Lisle Amp-Speaker Selector 6x6
$499.00Successfully Added to your Shopping CartAdding to Cart... -
￩￫
de Lisle Amp-Speaker Selector 8x8 MKII
$549.00The de Lisle Amp-Speaker Selector 8x8 MKII was designed as a studio tool to conveniently route the output of up to 8 amplifiers to various speaker cabinets. This version features a loop to allow a single attenuator (passive or active like the Reload II or Ox Box) to be easily shared between any combination of the amps and speakers.
Just connect your amps' outputs to the numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: select the desired amplifier with the Amplifier rotary dial and select the desired speaker cabinet with the Speaker rotary. You can activate an additional speaker by flipping the Extension switch. The Extension speaker will be added in parallel to the main speaker for additional tones, volume or to match impedance. For example, if one amp only has a 4 ohm tap, activating two 8 ohm cabinets will present the correct load to the amplifier.
Connect your attenuator's input to the Attenuator In jack and its output to the Attenuator Out jack. Use the front panel toggle to bring the attenuator in or out of the circuit. There's also a handy Ground switch to prevent ground loops between connected devices.
As a precaution, the unused amps see a load. Compatible with tube or solid state amps up to 150W.
This unit operates on the supplied 12 VDC power supply.
Bundle with our Amplifier Input Selector 6x to save $100!Maximum quantity exceededMinimum purchase amount of 0 is requiredde Lisle Amp-Speaker Selector 8x8 MKII
$549.00Successfully Added to your Shopping CartAdding to Cart...