de Lisle Amp-Speaker Selector 16x8 Stereo Pro
$1,999.00
A one-time price of $1,999.00 will be added to your order.
- Specs
• Input Impedance: 1 Meg
• Output Impedance: 500 Ohm
• Input Sensitivity: +20 Vp-p
• Switching Time: 4-8ms
• Contact Resistance: 0.075 Ohm
• Power Consumption: 6W Max
• Guitar / Pedalboard Input (2)
• Amplifier Input (8x2)
• Amplifier Output (8x2)
• D.I. (2)
• Attenuator Input (2)
• Attenuator Output(2)
• Attenuator Bypass Switch (2)
• Speaker Input (4x2)
• FX Send (8x2)
• FX Return (8x2)
• FX Bypass Switch (2)
• FX Input (2)
• FX Output (2)
• Transformer Isolation
• Internally Isolated DC Power Supply
• Silver Relay Contacts with Gold Overlay
• Protection Loads for Unused Amplifiers
• Auto Muting of Unused Amplifiers
• Premium 4U Rack Chassis with Laser Etched Panels
• 12VDC 700mA Power Supply Included
• Hand-Wired
• 150W Maximum Power Per Amp
• Lifetime Warranty
• Output Impedance: 500 Ohm
• Input Sensitivity: +20 Vp-p
• Switching Time: 4-8ms
• Contact Resistance: 0.075 Ohm
• Power Consumption: 6W Max
• Guitar / Pedalboard Input (2)
• Amplifier Input (8x2)
• Amplifier Output (8x2)
• D.I. (2)
• Attenuator Input (2)
• Attenuator Output(2)
• Attenuator Bypass Switch (2)
• Speaker Input (4x2)
• FX Send (8x2)
• FX Return (8x2)
• FX Bypass Switch (2)
• FX Input (2)
• FX Output (2)
• Transformer Isolation
• Internally Isolated DC Power Supply
• Silver Relay Contacts with Gold Overlay
• Protection Loads for Unused Amplifiers
• Auto Muting of Unused Amplifiers
• Premium 4U Rack Chassis with Laser Etched Panels
• 12VDC 700mA Power Supply Included
• Hand-Wired
• 150W Maximum Power Per Amp
• Lifetime Warranty
Related Products
-
￩￫
de Lisle 100W Impedance Matching Linearly Variable Reactive Attenuator
$599.00The de Lisle 100W Reactive Attenuator allows you to knock your amp's volume down to a more manageable level while maintaining its natural feel thanks to the reactive load. Attenuation is linearly variable up to -22.5dB. Our unique design eliminates the need for impedance matching at the amp. Just connect the attenuator to your amp's 8 ohm output, then you can use any combination of cabs as long as the total load is between 16 and 4 ohms. Use the transformer isolated D.I. to go straight into your DAW and load up your favorite IRs with the ability to record silently.Maximum quantity exceededMinimum purchase amount of 0 is requiredde Lisle 100W Impedance Matching Linearly Variable Reactive Attenuator
$599.00Successfully Added to your Shopping CartAdding to Cart... -
￩￫
de Lisle Amp-Speaker Selector 8x8 Stereo Deluxe
$949.00The de Lisle Amp-Speaker 8x8 Stereo Deluxe was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop and D.I.
The 8x8 Stereo Deluxe is our first model to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.
Amplifier Banks A/B each have up to 4 amps available for a total of 8. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.
Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.
The 8x8 Stereo Deluxe runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.
Maximum quantity exceededMinimum purchase amount of 0 is requiredde Lisle Amp-Speaker Selector 8x8 Stereo Deluxe
$949.00Successfully Added to your Shopping CartAdding to Cart... -
￩￫
de Lisle Amp-Speaker Selector 8x6 Pro Plus with Reactive Attenuator
$1,799.00The de Lisle Amp-Speaker 8x6 Pro Plus with Reactive Attenuator was designed to improve workflow in the studio by eliminating the need to re-cable amps, fx and speaker cabinets. This version expands on our previous designs by incorporating a built-in reactive attenuator that can be used as a load box for silent recording along with a transformer isolated D.I., simultaneous input switching, fx loop switching and dual speaker mode.
Multiple functions are controlled by the Amplifier dial. Selecting positions 1-8 will:
• Route the guitar input to the selected amp's input
• Send the amp's output to the selected speaker
• Mute all unused amps at their input
• Switch unused amps to a load
• Route the FX In / Out to the active amp's FX send and return jacks
• Place unused amp FX loops in bypass
Easily pair any of your amps with one or two of up to six connected cabinets by rotating the speaker switch. Should you need to roll back the SPL in the room, but keep your amp operating in the sweet spot, turn on the internal reactive attenuator. Attenuation is linearly variable from -6dB up to -22.5dB. Our unique design eliminates the need for impedance matching at the amp. Just connect your amp's 8 ohm output to the 8x6 Pro Plus Amp-Speaker Selector with Reactive Attenuator, then you can use any combination of cabs between 16 and 4 ohms.
Do you still want to be able to connect an Ox, Fryette Power Station or Boss Tube Amp Expander? No problem! The rear panel jacks allow you to insert an external attenuator which disconnects the internal reactive attenuator and D.I. functions.
With the hi-fi quality, transformer isolated D.I., you can go straight into your DAW and load up your favorite IRs. Use a TS cable for unbalanced or TRS for a balanced connection to your recording interface. The 8x6 Pro Plus Amp-Speaker Selector with Reactive Attenuator can also function as a reactive load box. Just flip the switch to disconnect the speaker and record silently.
The 8x6 Pro Plus Amp-Speaker Selector with Reactive Attenuator will quickly become mission control for your studio. Need help deciding which product is the best fit for you? Please feel free to reach out by phone or email. We're happy to help!
Patent Pending.
New features for 2024 models:
There are now three options for amp input switching. DIRECT takes the front panel input and sends it directly to the input of the selected amp, bypassing any additional circuitry. This is the position for normal use. ISO, for ISOLATED, sends the input signal through an isolation transformer. This can be used to eliminate ground loops or when a low impedance output is desired. When the ground switch is in the left position, the isolation transformer is bypassed entirely and an op-amp buffer provides a low impedance output. Download the manual for the latest features and control layout.
Maximum quantity exceededMinimum purchase amount of 0 is requiredde Lisle Amp-Speaker Selector 8x6 Pro Plus with Reactive Attenuator
$1,799.00Successfully Added to your Shopping CartAdding to Cart...