de Lisle 35P Amplifier

$1,999.00

Specs
Overview
Reviews
Options

• 35W Push-Pull / 12W Single-Ended
• Single Input
• Boost Switch
• Bass
• Treble
• Volume
• Master Volume
• Half Power Switch
• DC Elevated Heater Supply
• 12AX7 (1)
• EF86 (1)
• 12AT7 (1)
• 6L6-GC or EL34 (2)
• Cathode Bias
• Eminence or Celestion Speaker
• American Made Transformers
• Hand-Wired, Turret Board Construction
• Star Grounding
• Shielded Input/Grid Wiring
• Silver Plated Copper / TFE Teflon Wire
• Aluminum Chassis
• Dimensions: 20W x 18.75H x 9.5D, 40 lbs.
• Solid Pine Cabinet with Dovetail Joinery
• Choice of Tolex Covering
• Choice of Grill Cloth
• Made in the USA

Note: specifications subject to change based on selected options.

It shimmers, it shines, it grunts and it growls. The de Lisle 35P was designed to cover a broad tonal range and cover it well. (Check out the Review tab.) The 35P pumps out 35 watts of power in push-pull mode. Output can also be dropped down to 12 watts in the harmonically rich single-ended mode. The preamp features our signature arrangement, an EF86 fronted by a 12AX7. Modified James-style tone controls allow the player to tailor bass and treble frequencies. This tone stack offers greater frequency manipulation than some other designs. Choose the Expanded Control Panel options for even more variety. This option includes a Master Volume in addition to individual gain stage controls. The tone stack is expanded to include Contour. A switched Negative Feedback circuit is added as well as Pentode-Triode switching for the the EF86. Output is powered by a pair of 6L6-GC tubes, which are preceded by a 12AT7 phase inverter. Cathode biasing in the power stage ensures user-friendly operation. An American made 12" Eminence Wizard speaker is mounted to a birch ply baffle and housed in a large, solid pine cabinet. The pine planks are secured with dovetail joinery and finished off with a TV front. Our classic Blonde and brown color scheme covers the cabinet and baffle. The 35P is hand-built right here in our workshop using high quality components from numerous American manufacturers. It's a versatile, professional piece of gear offered at a price that many players can afford.

Some options are not available on all models or they may be standard features. Please refer to the Specs tab and the section above for this particular model.

• Configuration
Most amps are available as a head (amp and shell only), 1×12 combo, 2×12 combo or 2×10 combo.

• Tolex Color
The color of the main cabinet. We have quite a few options. If your desired color isn’t listed, let us know. We’ll see about getting it for you.

• Grill Cloth
Only applicable to combos. This material covers the speaker.

• Speaker
We offer a variety of Eminence, Celestion and Jensen speakers. If you need a recommendation, just let us know! If you’re ordering a head, you don’t need to select anything here.

Second Speaker
If you’re getting a 2×10 or 2×12, select this option. Feel free to mix or match speakers.

• Output Tube
Certain amps can be built with one of a few output tubes. If you’d rather have an amp with a 6V6 over an EL84, you have the option.

• Adjustable Boost with Footswitch
Replaces the boost switch (if equipped) with a potentiometer allowing for variable boost. The boost can also be activated remotely by the included footswitch.

• Aged Speaker Cone
We chemically age the speaker cone in addition to a physical break-in.

• DC Heater Supply
The tube heaters are run from DC instead of AC to help eliminate hum. (Our amps are already crazy quiet, so this one is here for completeness.)

• EF86 Pentode-Triode Switch
On models equipped with an EF86 preamp tube, this option allows the tube to operate in “triode” mode. This reduces the gain and changes the character of the EF86 – adding an alternate voice to the amp. The switch is included in the Expanded Control Panel option. Otherwise, it is installed on the bottom (combo) or back (head) of the chassis.

• External Speaker Out
Adds an additional speaker jack in order to drive an external cabinet. The internal speaker is disconnects when in use.

• Headphone Out
Plug in your phones and mute the speaker for quite practicing. A load is switched in to protect the amp.

• Tube Buffered FX Loop
High quality tube buffered loop with Send Level and Mix Return Level controls.

• Tube Rectifier
For big bottle power tubes, we generally use a GZ34. EL84/6973 amps employ an EZ81. We’re happy to use other types as well.

• Tube Reverb
An updated version of the classic effect. Our circuit was redesigned to complement modern 17″ spring reverb tanks.

• Tube Tremolo
Our Tremolo is the bias modulation variety. It modulates one of the preamp tubes, so there is no stress on the power amp or power supply. Smooth, slow and swampy to moderate speed – not a helicopter effect. Includes Speed and Depth controls.

• Unbalanced Line Out with Level Control
This option adds a 1/4″ line out from the speaker tap with a level control.

• VarioDyne Power Output
Linearly adjustable power output with compensated AC signal levels from one knob… The VarioDyne is our take on power reduction through voltage control. Unlike similar methods that only manipulate DC voltages, the VarioDyne also controls the AC signal voltages coming into the reduced power stages. Our approach eliminates the need for an additional Master / Drive pot by reducing the input signal to suit the new DC operating point. We do this without reducing the preamp DC voltages to maintain a smooth overdrive. The VarioDyne is great for matching stage volume to a specific venue, dropping the output for the studio or even playing at home. Want to overdrive the power amp without alienating friends and neighbors? Just turn down Volume 2 knob to adjust the power output while maintaining the amp’s character and tone. Simple and effective.

• XLR Out with Level Control
Adds a transformer isolated XLR and level control off the speaker tap.