Related Products

• 

  de Lisle Drop Box Linearly Variable 5W Attenuator

  $69.00

  It's no secret that even a 5W amp when overdriven can be too loud for home use. The de Lisle Drop Box allows you to knock that volume down to a more manageable level. It's linearly adjustable from -2dB to -15dB. Just insert the Drop Box between your amp's output and the speaker and you're ready to rock!

  Maximum quantity exceeded

  Minimum purchase amount of 0 is required
  

  de Lisle Drop Box Linearly Variable 5W Attenuator

  $69.00

  It's no secret that even a 5W amp when overdriven can be too loud for home use. The de Lisle Drop Box allows you to knock that volume down to a more manageable level. It's linearly adjustable from -2dB to -15dB. Just insert the Drop Box between your amp's output and the speaker and you're ready to rock!

  ADD TO CART CHECKOUT NOW

  de Lisle Drop Box Linearly Variable 5W Attenuator

  $69.00

  ADD TO CART CHECKOUT NOW

  Successfully Added to your Shopping Cart

  Adding to Cart...
• ￩

  ￫

  

  de Lisle Amp-Speaker Selector V3 with Loop

  $289.00

  Save 15% with the Amp-Speaker Selector V3 and Drop Box 50W Linearly Variable Attenuator bundle! Add our transformer isolated ABC switch to route the input signal for more savings!
  
  The de Lisle Amp-Speaker Selector V3 was designed as a studio tool to conveniently route the output of up to three amplifiers to various speaker cabinets. This version features a loop to allow a single attenuator or similar device to be easily shared between any combination of the amps and speakers.
  
  Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the three Speaker switches on the front panel correspond to the three speaker connections. The 0-3 positions of each bank match that speaker cabinet to an amplifier (or 0 for not connected).
  
  Connect your attenuator's input to the Send jack and its output to the Return jack. Use the front panel Send knob to connect the attenuator to any of the amps' outputs. Then, set one or more of the Speaker knobs to the return arrow icon (position 5).
  
  Use multiple amps at the same time, swap speaker cabinets between amps, share a single attenuator or connect multiple speakers to an amp in parallel. Signal and ground connections from the amps are always isolated from one another. And as a precaution, the unused amps see a load.

  Select Options
  

  de Lisle Amp-Speaker Selector V3 with Loop

  $289.00

  Save 15% with the Amp-Speaker Selector V3 and Drop Box 50W Linearly Variable Attenuator bundle! Add our transformer isolated ABC switch to route the input signal for more savings!
  
  The de Lisle Amp-Speaker Selector V3 was designed as a studio tool to conveniently route the output of up to three amplifiers to various speaker cabinets. This version features a loop to allow a single attenuator or similar device to be easily shared between any combination of the amps and speakers.
  
  Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the three Speaker switches on the front panel correspond to the three speaker connections. The 0-3 positions of each bank match that speaker cabinet to an amplifier (or 0 for not connected).
  
  Connect your attenuator's input to the Send jack and its output to the Return jack. Use the front panel Send knob to connect the attenuator to any of the amps' outputs. Then, set one or more of the Speaker knobs to the return arrow icon (position 5).
  
  Use multiple amps at the same time, swap speaker cabinets between amps, share a single attenuator or connect multiple speakers to an amp in parallel. Signal and ground connections from the amps are always isolated from one another. And as a precaution, the unused amps see a load.

  Select Options

  de Lisle Amp-Speaker Selector V3 with Loop

  $289.00

  Select Options

  Successfully Added to your Shopping Cart

  Adding to Cart...